Posted by LOFY

Konverents 2012

TÜ ja TTÜ doktorikooli “Funktsionaalsed materjalid ja tehnoloogiad” kolmas teaduskonverents toimus 29. veebruar -01. märts 2012 Tartus Dorpat konverentsikeskuses

Konverentsi programm

Kolmapäev, 29. veebruar 2012

10.00-10.40 Osavõtjate registreerimine. Hommikukohv
Konverentsi juhatavad: dr Marco Kirm ja prof Jaak Kikas
Suulised ettekanded
Esinemise aeg doktorant ja kaasautorid Asutus pealkiri koos lingiga teesidele
10.40-11.40 AVALOENG Raido Pikkar, dr Raivo Tammkivi, Kati Nikopensius Tallinna Teaduspark TEHNOPOL „Alustatavate teaduspõhiste ettevõtete inkubatsioon Tallinna Teaduspargis TEHNOPOL”
11.40-12.00 (1) Janno Torop, Mati Arulepp, Alvo Aabloo TÜ TI „Nanoporous carbide-derived carbon material for low-voltage driven actuators”
12.00-12.20 (2) Geven Piir, Sulev Sild, Uko Maran TÜ KI „Improving predictebility of bio-concentration factor using local and consensus models”
12.20-12.40 (3) Leonid Dorogin, Boris Polyakov, Sergei Vlassov, Ants Lõhmus, Alexey Romanov, Ilmar Kink, Rünno Lõhmus TÜ FI „Measurement of tribological properties of a nanowire on a flat substrate”
12.40-13.00 (4) Jekaterina Kozlova, Tauno Kahro, Jaan Aarik, Lauri Aarik, Harry Alles, Alar Gerst, Raivo Jaaniso, Aarne Kasikov, Ahti Niilisk, Väino Sammelselg TÜ FI „Using large-area graphene prepared by chemical vapor deposition for gas sensorics ”
…
13.00-14.00 LÕUNASÖÖK
…
14.00-14.50 STENDIETTEKANDED
…
Konverentsi juhatavad: prof Enn Lust ja dr Toomas Plank
Esinemise aeg doktorant ja kaasautorid Asutus pealkiri koos lingiga teesidele
15.00-15.20 (5) Merle Lust, Enn Realo TÜ FI „Assessment of natural radiation exposure from building materials”
15.20-15.40 (6) Mihkel Pajusalu, Margus Rätsep, Arvi Freiberg TÜ FI „Confirmation of presence of excitons in room-temperature bacterial cell membranes”
15.40-16.00 (7) Karl Kruusamäe, Andres Punning, Alvo Aabloo TÜ TI „Artificial muscles: a giant step towards micromachinery”
16.00-16.20 (8) Arkadi Zikin, Irina Hussainova, Ewald Badisch TTÜ „Production of advanced high temperature wear resistant hardfacings”
16.20-16.40 (9) Eron Adoberg, V. Podgurski, P. Peetsalu, L. Lind, V. Mikli, P. Kulu TTÜ „The effect of surface pre- and post-treatment to the properties of tin hard coating”
…
16.40-17.00 KOHVIPAUS
…
17.00-19.00 TEADUSKESKUS AHHAA külastus (I rühm)
…
17.00-17.20 (10) Marje Kasari, Angela Vaasa, Erki Enkvist, Asko Uri TÜ KI „Molecular complexes with microsecond luminescene lifetime”
17.20-17.40 (11) Indrek Tallo, Thomas Thomberg, Alar Jänes, Enn Lust TÜ KI „Nanostructured Tungsten carbide-derived carbon as electrode material for supercapacitors”
17.40-18.00 (12) Vladislav Ivaništšev, Jan Rossmeisl, Satish Narayana Srirama, Chris Willmore, Cüneyt Sina Koca, Ulrich Norbisrath TÜ KI, ATI „Theoretical DFT study of the electrified Au(111) | EMIMBF4 ionic liquid interface using cloud computing”
…
18.00-19.00 STENDIETTEKANDED
…
19.00 ÕHTUSÖÖK

Neljapäev, 1. märts 2012

Konverentsi juhatavad: prof Andres Öpik ja dr Malle Krunks
Suulised ettekanded
Esinemise aeg doktorant ja kaasautorid Asutus pealkiri koos lingiga teesidele
9.00-9.20 (13) Kerti Ausmees, Kadri Kriis, Tõnis Pehk, Margus Lopp and Tõnis Kanger TTÜ „Synthesis of heterobicyclic heptanes via diastereoselective multicomponent cascade reaction”
9.20- 9.40 (14) Nirmal Adhikari, S. Berezneva, K. Laesa, J. Koisa, O. Volobujevaa, T. Raadika, R. Traksmaab, R.K. Dahala ,A. Tverjanovichc, A. Öpik TTÜ „PVD of highly photosensitive n-CuIn5Se8 films for hybrid PV structures ”
9.40-10.00 (15) Jelena Hruljova, Vahur Oja, Oliver Järvik TTÜ „Solvent swelling of oil shale kerogen. A novel DSC-based approach.”
…
10.00- 10.20 KOHVIPAUS
…
10.00- 11.00 STENDIETTEKANDED
…
… FMTDK nõukogu koosolek
Konverentsi juhatavad: prof Andres Öpik, dr Malle Krunks ja prof Enn Mellikov
Suulised ettekanded
Esinemise aeg doktorant ja kaasautorid Asutus pealkiri koos lingiga teesidele
11.00-11.20 (16) Indrek Reile, Anne Paju, Tõnis Kanger, Ivar Järving, Margus Lopp TTÜ „Cyclopentane-1,2-dione bis(tert-butyldimethylsilyl)enol ether in asymmetric organocatalytic Mukaiyama–Michael reactions”
11.20-11.40 (17) Priit Eek, Reet Järving, Ivar Järving, Nathaniel C. Gilbert, Marcia E. Newcomer, Nigulas Samel TTÜ „X-ray crystal structure of a calcium-dependent 11R-lipoxygenase suggests a mechanism for Ca+2-regulation”
11.40-12.00 (18) Svetlana Jõks, Deniss Klauson, Marina Krichevskaya, Sergei Preis, Fei Qi, Alfred Weber, Anna Moiseev, Joachim Deubener TTÜ „Gas-phase photocatalytic activity of nanostructured titanium dioxide from flame aerosol synthesis”
12.00-12.20 (19) Kairi Otto, Malle Krunks TTÜ „Structure and thermal decomposition of precursors used for spray deposited indium sulfide thin films”
12.20.-12.40 (20) Petri-Jaan Lahtvee, Kaarel Adamberg, Liisa Arike, Ranno Nahku, Kadri Aller, Raivo Vilu TTÜ „Description of growth efficiency and amino acid metabolism in Lactococcus lactis at various specific growth rates at systems biology level”
12.40-13.00 (21) Ivar Kruusenberg, Leonard Matisen, Qurat Shah, Arunachala Nadar Mada Kannan, Kaido Tammeveski TÜ KI „Electrochemical reduction of oxygen on platinum-free cathode catalysts for alkaline membrane fuel cells”
…
13.00-14.00 LÕUNASÖÖK
Konverentsi juhatavad: prof Enn Lust ja dr Marco Kirm
Suulised ettekanded
Esinemise aeg doktorant ja kaasautorid Asutus pealkiri koos lingiga teesidele
14.20-14.40 (22) Jaan Habicht, Uno Mäeorg TÜ KI „Oxidation of resorcinols in retorted kukersite”
14.40-15.00 (23) Kerli Tõnurist, Thomas Thomberg, Alar Jänes, Enn Lust TÜ KI „Influence of separator properties onto electrochemical performance of electrical double-layer capacitors”
15.00-15.20 (24) Riin Rebane, Koit Herodes TÜ KI „Influence of boric acid on ESI ionization efficiency.”
15.20-15.40 (25) Karin Kipper, Koit Herodes TÜ KI „Using 1,1,1,3,3,3-hexafluoroisopropanol for microanalysis of meropenem in biological fluids by UHPLC/MS”
15.40-16.00 Konverentsi lõpetamine,dr Marco Kirm, FMTDK nõukogu esimees
… FMTDK nõukogu koosolek
…
16.00-18.00 TEADUSKESKUS AHHAA külastus (II rühm)

Stendiettekanded

1 Georg Allikas „Accelerated full scale fatigue analysis of a small wind turbine blade”
2 Roman Boroznjak, Vitali Syritski, Jekaterina Reut „Immunoglobulin g oriented immobilization strategy for preparation of protein surface imprinted films ”
3 Mati Danilson, Nikhil Pokharel, Jüri Krustok „Electrical characterization of CZTS-based monograin layer solar cells”
4 Heiki Erikson, Ave Sarapuu, Nadežda Alexeyeva, Kaido Tammeveski, Jose Solla-Gullón, Juan M. Feliu „Electrochemical reduction of oxygen on palladium nanocubes in acid and alkaline solutions”
5 Irina Epold, Jelena Veressinina, Marina Trapido „Degradation of emerging pharmaceuticals in water/wastewater matrix with advanced oxidation processes: a comparative studyirina e”
6 Irja Helm, Lauri Jalukse, Ivo Leito „Half-gravimetric micro-winkler titration method for dissolved oxygen concentration measurement”
7 Siim Hödemann, Johan Anton, Andrei Errapart, Mart Paemurrua, Dominique Lochegnies, Siim Hödemannd, Hillar Aben, Jaak Kikas „On the inhomogeneity of residual stresses in tempered glass panels”
8 Julia Iljina, O.Volobujeva, T.Raadik „Annealing of electrodeposited stacked precursor layers in selenium vapour”
9 Jekaterina Jefimova, N. Irha, U. Kirso „Determination of bioavailable fraction of hydrophobic contaminants in oil shale processing wastes”
10 Urmas Joost, R. Pärna, E. Nõmmiste, T. Käämbre, A. Kikas, I. Kuusik, M. Hirsimäki, I. Kink, V. Kisand „Investigation of nickel-doped titania thin films deposited on native oxide covered Si(100) substrate by the sol-gel method”
11 Natalja Kabanova, Irina Stulova, Raivo Vilu „Microcalorimetric study of the growth of bacterial colonies of Lactococcus lactis IL1403 in solid agar gels”
12 Liina Kanarbik, Margit Heinlaan, Irina Blinova „Risk management and remediation of chemical accidents”
13 Triin Kangur, Paula Reemann, Margo Plaado, Eugene Shulga, Valter Kiisk, Ants Lõhmus, Martin Järvekülg „Chemical and topographic effects on fibroblasts”
14 Jana Kazarjan, Merike Vaher „Capillary electrophoretic monitoring of the production of sugars during the enzymatic hydrolysis of willow tree”
15 Karl Kaupmees, Ivari Kaljurand, Ivo Leito „Influence of water content on the acidities in acetonitrile. quantifying charge delocalization in anions”
16 Elo Kibena, Uno Mäeorg, Leonard Matisen, Kaido Tammeveski „A comparative study of electrochemical properties of glassy carbon electrodes modified with azobenzene derivatives”
17 Eeva-Gerda Kobrin, Petr Kuba’n, Mihkel Kaljurand „Determination of post-blast explosive residues in various matrices using portable capillary electropherograph with contactless conductivity detection”
18 Kaia Kukk, Reet Järving, Nigulas Samel „Purification and characterization of the recombinant human prostaglandin H synthase-2 expressed in Pichia pastoris”
19 Aleksandr Käkinen, Heiki Vija, Olesja Bondarenko, Katre Juganson, Irina Blinova, Anne Kahru „Physico-chemical characterisation of silver and copper nanoparticles for ecotoxicological studies”
20 Erki Kärber, A.Katerski, A.Mere, M.Krunks „Electrical characterization of nanostructured solar cells prepared by chemical spray pyrolysis ”
21 Mary-Liis Kütt, Toomas Paalme; Jan Stagsted „Antimicrobial peptides and comparison of maldi and naldi for detecting low molecular weight components”
22 Raul Laasner, N. Fedorov, V. Nagirnyi, R. Grigonis, S. Guizard, M. Kirm, V. Makhov, S. Markov, V. Sirutkaitis, A. Vasil’ev, S. Vielhauer, I.A. Tupitsyna „Spatially-resolved analysis of the decay kinetics of CdWO4 using fs laser pulses in the saturated absorption regime”
23 Jekaterina Mazina, Valeri Aleksejev, Mihkel Kaljurand, Larissa Poryvkina „Determination of cannabis and its products by sfs-mlp-ann method: validation of the procedure”
24 Maido Merisalu, Jelena Asari, Jekaterina Kozlova, Mailiis Pala, Margus Marandi, Väino Sammelselg „Electrochemical pretreatment and characterization of aluminium alloy 2024 ”
25 Jayanta Mondal, J. Kozlova, M. Marandi, A. Niilisk, V. Sammelselg „Graphene and graphene oxide dispersion in different solvents and their thin films”
26 Ivan Netšipailo, Aivar Tarre, Aleks Aidla, Jaan Aarik and Väino Sammelselg „Etching rates and surface properties of CTO (Chromium- titanium oxide) and TiO2 thin films grown by ALD”
27 Teemu Näykki, Teemu Näykki, Atte Virtanen and Ivo Leito „Improving comparability of analytical results with practical software for estimating measurement uncertainty”
28 Marek Oja, Eduard Feldbach, Sebastian Vielhauer, Marco Kirm „Electronic properties of transition alumina nanopowders investigated by means of VUV and cathodoluminescence spectroscopy”
29 Kaja Pae, Vladimir Hižnjakov „Vibronic transitions to a state with jahn-teller effect: contribution of phonons in case of absorption and resonant raman scattering.”
30 Margo Plaado, Robert Matias Mononen, Lauri Aarik, Jaan Aarik, Ilmar Kink, Rünno Lõhmus, Kristjan Saal „Porous carbon nanotube microfibers reinforced by atomic layer deposited titania”
31 Sander Piiskop, Siim Salmar, Ants Tuulmets, Jaak Järv, Tiina Tenno, Jana Jõgi „New glance on role of water in organic reactivity in aqueous binary solvents”
32 Gert Preegel, Indrek Reile, Mario Öeren, Tiiu Kailas, Margus Lopp „Determination of the absolute configuration of 3-(3-hydroxy-1-phenylpropyl) –cyclopentane-1,2-dione”
33 Kaija Põhako, Uno Mäeorg, Kristjan Saal „Comparative study of methods for synthesis of polymerizable ionic liquids”
34 Arno Ratas, Mikhail Danilkin, Mihkel Kerikmäe, Aime Lust, Hugo Mändar, Viktor Seeman, Georg Slavin „Li2B4O7:Mn radiation detector: traps and mechanisms”
35 Kaarin Ratas, Priidu Peetsalu „Influence of aging process to domes and cones of 3-piece aerosol cans”
36 Ergo Rikmann, Ivar Zekker, Kristel Kroon, Alar Saluste, Priit Vabamäe, Taavo Tenno, Anne Menert, Liis Loorits, Toomas Tenno „Sulfate-reducing or nitrite-dependent anammox for ammonium removal?”
37 Kärt Reitel, Tõnis Kanger „Cyclopropane-containing compounds in organocatalytic reactions”
38 Mihkel Rähn, V. Palm, V. Hizhnyakov „Excitation of surface plasmons in Al-coated SNOM tips”
39 Aigi Salundi, M. Järvekülg, M. Timusk, T. Tätte, V. Reedo, M. Paalo, K. Saal, A. Lõhmus „Novel nano- and microscale metal oxide materials by sol-gel processing”
40 Lauri Sikk, Jaana Tammiku-Taul, Peeter Burk „Computational study ofcopper-free sonogashira cross-coupling reaction: shortcuts in the mechanism”
41 Sirli Sepper, Priidu Peetsalu „Effect of sandelin steel microstructure on formation of hot dip galvanized coatings”
42 Jevgeni Šablonin „Electronic excitations and defect creation in wide-gap mgo single crystals irradiated with swift heavy ions”
43 Anna Shugai „Luminescent protection against defect creation in Lu3Al5O12:Ce ”
44 Sergei Žari, Marina Kudrjašova, Tõnis Kanger „Asymmetric addition to aromatic unsaturated 1,4-diketones catalyzed by cinchona alkaloid derivatives”
45 Artur Tamm, Alvo Aabloo „State of niobium empirical potentials for radiation damage studies”
46 Kadriann Tamm, Rein Kuusik, Mai Uibu, Juha Kallas „Formationof H2S at aqueous carbonation of oil shale ash and calcium sulfide”
47 Anu Teearu, Signe Vahur, Tõiv Haljasorg, Piia Burk, Ivari Kaljurand, Ivo Leito „Analysis of dammar resin with MALDI- and APCI-FT-ICR-MS”
48 Martin Timusk, Martin Järvekülg, Aigi Salundi, Rünno Lõhmus, Ilmar Kink, Kristjan Saal „Optical properties of high-performance liquid crystal-xerogel microcomposite electro-optical films”
49 Ada Traumann, Piia Tint „Improvement of indoor-climate through innovative risk assessment methods”
50 Eliko Tõldsepp, Margus Kodu, Raivo Jaaniso, Eduard Feldbach, Marco Kirm, Tea Avarmaa „Characterization of C12A7 thin films prepared by pulsed laser deposition”
51 Arvo Tõnisoo, Jaanus Kruusma, Ergo Nõmmiste „Preparation of a prototype cell for the electrochemical studies”
52 Kathriin Utt, Marko Part, Tanel Tätte, Valter Kiisk, Ilmo Sildos „Preparation and optical characterisation of sol-gel derived zirconium oxide fibers and microtubes”
53 Taavi Vaikjärv „Resonance Raman scattering caused by non-adiabatic transitions”
54 Kaspar Valgepea, Kaarel Adamberg, Raivo Vilu „Systems biology approach reveals decrease of energy spilling in Escherichia coli continuous cultures with rising specific growth rate and carbon wasting”
55 Piret Villo, Lauri Tooma, Lauri Vares „Synthesis of acetogenin analogues”
56 Mihkel Vestli, Gunnar Nurk, Enn Lust „Deposition of samaria-doped ceria film by ultrasonic spray pyrolysis method”
57 Ene Viiard, Marianna Bessmeltseva, Toomas Paalme, Inga Sarand „Microbial composition and dynamics of laboratory rye sourdoughs”
58 Marika Viisimaa, Anna Goi „Ozone, hydrogen peroxide and persulfate combined application for chemical oxidation of polychlorinated biphenyls in contaminated soil”
59 Nikolai Voltsihhin, Irina Hussainova „Sintering technologies for the production of hardmetals.”
60 Mario Öeren, Toomas Tamm „Cumulative anomeric effect: a theoretical study of titanium tetraisopropoxide”
61 Tatjana Gretšušnikova, Anne Orav, Mihkel Koel „The investigation of the rhododendrum tomentosum harmaja essential oil composition ”
62 Kersti Vaarmets, Jaak Nerut, Enn Lust „Mo2C derived carbons supported Pt and Pt-Ru catalysts for pemfc ”
63 Kalev Kasemets, Martin Kutsar, Peeter Burk „Gas-phase basicities of alkali metal oxides, hydroxides and amines”
64 Tauno Kahro, J. Aarik, L. Aarik, H. Alles, A. Kasikov, J. Kozlova, H. Mändar, A. Niilisk, P. Ristlaid and V. Sammelselg „Synthesis of graphene on epitaxial nickel films ”
65 Kaspar Kevvai, Ildar Nisamedtinov, Toomas Paalme „Microbial and cell culture growth-inducing peptides in yeast hydrolysates”
66 Aivar Tarre, Aleks Aidla, Hugo Mändar, Jelena Asari, Teet Uustare, Arnold Rosental „Iodide/ozone system in atomic layer deposition of tin dioxide”
67 Andero Vaarik, Mare Taagepera, Toomas Tenno „Following the logic of student thinking patterns about atomic orbital structures”
68 Ivar Zekker, Siegfried Elias Vlaeminck, Samik Bagchi, Emilie Courtens, Haydée de Clippeleir, Frederiek-Maarten Kerckhof and Nico Boon „Selecting nitrifying communities on different nh4+ concentrations”
69 Aleksandr Jarkov, S. Bereznev, J. Kois, O. Volobujeva, A. Öpik „Photo-assisted electrodeposition of polypyrrole back contact to CdS/CdTe solar cell structures”
70 Madis Paalo, Tanel Tätte, Aare Floren, Madis Lobjakas, Ants Lõhmus, Uno Mäeorg, Ilmar Kink „Preparation and characterization of transparent fiber electrodes based on CNT-s metal oxides”
71 Marko Part, Keio Riikjärv, Kelli Hanschmidt, Aile Tamm, Ants Lõhmus, Kaupo Kukli, Tanel Tätte „Novel method for preparation of metal oxide microtubes and their properties”
72 Kadri Veende „Vibronic phase transitions in a system with doping-dependent electron bands”
73 Liina Lind, Priidu Peetsalu, Adolf Talkop „Reasons for tool service and failure during fine-blanking production process”

Doktorikooli rahastab Euroopa Liit